Loading ...
Loading ...
Loading ...
Automatic safety cut-out en
9
Kitchen timer
You can use the kitchen timer to set a time of up to 99
minutes. It runs independently of all the other settings.
Switching on the kitchen timer
You can switch the kitchen timer on in 2 different ways:
■ If a hotplate has been selected, touch the 0 symbol
twice within 10 seconds.
■ If a hotplate has not been selected, touch the 0
symbol.
The V display lights up.
Setting the kitchen timer
Set the desired time in the control panel.
After the time has elapsed
After the time has elapsed, you will hear a beep. ‹‹
lights up in the timer display. The V display for the
kitchen timer lights up brightly. The display switches off
after 10 seconds.
Displaying the time
Use the 0 symbol to select the kitchen timer. The time
is displayed for 10 seconds.
Setting the correct time
Use the 0 symbol to select the kitchen timer and reset
the time.
bAutomatic safety cut-out
Au t o mat i c saf et y cut - out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating. ”‰ and the •/œ residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
kWipe protection
Wipe pr ot ec t i on
If you wipe over the control panel while the hob is
switched on, settings may be changed.
To prevent this from happening, your hob has a wipe
protection function. Touch the > D symbol. A beep
goes off and the display light above the > D symbol
lights up. The control panel is locked for 30 seconds.
You can now wipe over the control panel without
changing any settings.
Note: The primary switch is not affected by the wipe
protection function. You can switch off the hob at any
time.
[Energy consumption
indicator
En e r gy cons umpt i on indicator
You can use this function to display the total energy
consumption between switching the hob on and off.
Once switched off, the energy consumption is displayed
in kilowatt hours (e.g. 1.08 kWh) for 10 seconds
The accuracy on the display depends on the voltage
quality of the power supply, among other factors.
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.~ Page 9
QBasic settings
Ba s i c set t i ngs
Your appliance has various basic settings. You can
adjust these settings to meet your own needs.
Display Function
™‚
Automatic child safety lock
‹
Switched off.*
‚
Switched on.
ƒ
Manual and automatic child safety lock switched off.
™ƒ
Beep
‹
Confirmation signal and operation error signal are
switched off (primary switch signal always remains).
‚
Only the operation error signal is switched on.
ƒ
Only the confirmation signal is switched on.
„
Confirmation signal and operation error signal switched
on.*
™„
Energy consumption display (Ask your electric com-
pany what the mains voltage is)
‹
Consumption display switched off.*
‚
Consumption display with mains voltage at 230 V.
ƒ
Consumption display with mains voltage at 400 V.
„
Consumption display with mains voltage at 220 V.
…
Consumption display with mains voltage at 240 V.
*Basic setting
Loading ...
Loading ...
Loading ...