Loading ...
Loading ...
Loading ...
● Swapping Your World Time and Home
Time
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
●
The second hand will point to “N” if
connection fails for some reason.
3.
Y
Perform the operation shown on the
phone screen to swap your Home Time
with your World Time.
For example, if your Home City is Tokyo
and the World Time City is New York, they
will be swapped as shown below.
●
The second hand will point to the time
zone of the currently selected World
Time City for a few seconds after you
swap times.
30 30
World Time City
(New York)
World Time City
(Tokyo)
Home City (New York)
Home City (Tokyo)
After swappingBefore swapping
Note
●
Auto time adjustment does not work for
24 hours after swapping of the Home
Time and World Time.
Setting the Alarm
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
●
The second hand will point to “N” if
connection fails for some reason.
3.
Y
Perform the operation shown on the
phone screen to configure alarm time
settings.
●
Change the alarm setting from off to on.
●
Set the hour and minute of the alarm
time.
Configuring Timer Settings
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
●
The second hand will point to “N” if
connection fails for some reason.
3.
Y
Perform the operation shown on the
phone screen to configure the timer time
setting.
●
Set the hours and minutes of the timer
start time.
Adjusting Hand and Day
Indicator Alignment
If the hands and/or date indicator are out of
alignment even though auto time adjustment
is being performed, use G-SHOCK
Connected to adjust them.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
●
The second hand will point to “N” if
connection fails for some reason.
3.
Y
Perform the operation shown on the
phone screen to correct hand and day
indicator alignment.
Configuring Watch Settings
You can use G-SHOCK Connected to specify
the amount of time until the Bluetooth
connection is automatically terminated, and to
configure other settings.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about 2.5 seconds.
This causes the second hand to move to
[C] and establishes a connection between
the watch and phone.
●
The second hand will point to “N” if
connection fails for some reason.
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Operation Guide 5502
12
Loading ...
Loading ...
Loading ...