Loading ...
Loading ...
Loading ...
6
WARNING
When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and gloves.
NOTE: Before proceeding to the installation, check the contents of the box. If items are missing or damaged, contact the manufacturer.
Make sure that the following items are included:
- Range hood
- Accessories:
• Baffle filters with handles: 30” and 36” hoods come with 3 baffle filters; 42” and 48” hoods come with 4 baffle filters
• 3¼” x 10” adapter/damper (included with internal single blower hood, see page 8 to locate the adapter)
• 4½” x 18½” adapter (included with internal double blower hood, see page 8 to locate the adapter)
• In-line and exterior blower rough-in plate model 332KR (mounted inside all external blower hoods)
• Bag of parts including:
1 wire clamp, 9 no. 8 x 1/2”, 2 wire connectors, 8 no. 8-32 x 1/4” mechanical screws, 4 no. 8 x 3/8” screws
Parts sold separately:
- In-line blower assembly HLB3, HLB6, HLB9 or HLB11 (all include transition)
- Exterior blower assembly 331H, 332H, 335 or 336
- RMP Series Backsplash (optional)
- Transitions, duct, elbows, dampers, wall or roof cap
Refer to pages 3 and 4 for a complete list of venting options and model numbers.
NOTES: 1. For cabinets with recessed bottom, attach three wood filler strips cut to length (not included), on each side, as shown below.
See illustration and table below for wood filler strips location.
2. For hoods with external or in-line blowers, do not install the transverse wood filler strip.
2. PREPARE THE INSTALLATION
HOOD WIDTHS
CENTER OF WOOD
STRIP LOCATION (A)
30” 13³/
8”
36” 16³/
8”
42” 19³/
8”
48” 22³/
8”
HD0285A
L
C
AA
10”
!
Loading ...
Loading ...
Loading ...