Loading ...
Loading ...
Loading ...
65
Oxygen Pro 49 and 61 Preset Edit Mode
When SHIFT is pressed and held and the PRESET button is pressed, it will enter into editing
the currently selected Preset.
The default parameter to be edited will be the current Preset’s Pitch Wheel assignment.
However, once a different control is moved, or pressed, for example Knob 1, it will activate
that selected control for editing.
Storing a Preset
To store a Preset:
1. Press SHIFT and the Preset button to enter Edit Mode.
2. Edit a control as outlined in the
Preset Edit Mode section of this guide.
3. Press the Preset button.
4. The display will show “SAVE?” with the following selections available.
• Cancel: Selecting “Yes” to Cancel will revert any changes made.
• Replace: Selecting “Yes” to Replace will write over the currently selected preset.
• Save As: Selecting “Yes” to Save As enable you to choose what number
“LOCATION” the preset will be and edit/change what the preset’s name “NAME” is.
The last available selection in the Save As screen is Save. Pressing “Yes” on the
Save screen will save your new preset.
Note: When editing a preset name, use the Encoder to scroll to a letter you want to
edit and press the Encoder to select the current letter. To erase a letter in a preset
name, press SHIFT and the Back button.
Channel Definitions
Channel:
Select the global channel (Global) to use the channel assigned in the GLOBAL SETTING
menu, a specific channel (Channel 1–16), a zone (Zone 1–4), or all channels (Omni).
• Global: Will send on the global MIDI channel. The Global MIDI channel is assigned in the
GLOBAL EDIT SETTINGS menu.
• Channel 1–16: Will send on a specific MIDI channel.
• Zone 1 – 4: Will send on the same channel as the assigned Zone’s channel. This enables
you to split the keybed into 4 separate zones, and use different controls to only effect
that specific zone.
• Omni: Will send on all MIDI channels. This enables you to split the keybed into 4 separate
zones, and one control to control all 4 zones. For example, if you want the PITCH or
MOD WHEEL to function in several different zones.
Loading ...
Loading ...
Loading ...