Loading ...
Loading ...
Loading ...
34
Fader
To edit the Fader control when in Preset Edit Mode, move the Fader. You can scroll through
the available parameter values using the Encoder. Select what parameter you would like to
edit by pressing the Encoder.
Channel: The Fader will send its messages over this channel. Select the global channel
(Global), a specific channel (Channel 1–16), a zone (Zone 1–4), or all channels (Omni).
Available Values: Global, 1-16, Zone 1-4, Omni
CC: The fader will send its MIDI messages using this CC number.
Available Values: 0-127
Minimum Value: The fader’s minimum position will correspond with this value. You can
reverse the fader’s polarity by making this value larger than the Maximum value.
Available Values: 0-127
Maximum Value: The fader’s maximum position will correspond with this value. You can
reverse the fader’s polarity by making this value smaller than the Minimum value.
Available Values: 0-127
Knobs
To edit one of the Knobs when in Preset Edit Mode, move a Knob. You can scroll through the
available parameter values using the Encoder. Select what parameter you would like to edit by
pressing the Encoder.
Channel: The knob will send its messages over this channel. Select the global channel
(Global), a specific channel (Channel 1–16), a zone (Zone 1–4), or all channels (Omni).
Available Values: Global, 1-16, Zone 1-4, Omni
CC: The knob will send its MIDI messages using this CC number.
Available Values: 0-127
Minimum Value: The knob’s minimum position will correspond with this value. You can
reverse the knob’s polarity by making this value larger than the Maximum value.
Available Values: 0-127
Maximum Value: The knob’s maximum position will correspond with this value. You can
reverse the knob’s polarity by making this value smaller than the Minimum value.
Available Values: 0-127
Loading ...
Loading ...
Loading ...