Loading ...
Loading ...
Loading ...
24
Care & Cleaning
REPLACING THE WATER FILTER
IN THE WATER TANK
REPLACEMENT DUE
4
Set date 3 months
ahead
5m
H
2
0
1
Soak water filter
for 5 mins
2
Rinse water filter
3
Place filter into
filter holder
5
Install filter in
water tank
6
Insert & lock
water tank
The provided water filter helps reduce the risk
of scale build-up in and on many of the inner
functioning components. Replacing the water
filter every three months will reduce the need
to descale the machine. If you live in a hard
water area, it is recommended to change the
water filter more frequently.
WARNING
After regular use, hard water can cause
mineral build up in and on many of the inner
functioning components, reducing the brewing
flow, brewing temperature, power of the
machine, and taste of the espresso.
• Remove the filter from the plastic bag, and
soak in a cup of water for minutes.
• Rinse the filter under cold running water
for seconds.
• Insert the filter into the filter holder.
• Set the date dial months ahead.
• To install, push down the filter to lock
into place.
NOTE
For replacement of water filters contact Breville
Customer Service Centre or visit our website at
www.breville.com
CLEANING CYCLE
NOTE
This is a back-flushing cycle and separate
from descaling.
The CLEAN / DESCALE light
will flash
when a cleaning cycle is required.
. Insert the CUP filter basket into the
portafilter, followed by the supplied
cleaning disc, followed by one
cleaning tablet.
. Lock the portafilter into the group head
and place a large container beneath the
portafilter spouts.
. Ensure the water tank is filled with cold
water and the drip tray is empty.
. Press the POWER button to switch the
machine o.
. Press and hold CUP, CUP and the
POWER buttons for seconds.
+ +
3s
. The cleaning cycle will commence and last
for approximately minutes. During this
time, water will intermittently flush into the
portafilter to dissolve the cleaning tablet
and flush back into the group head.
NOTE
No water should come through the portafilter.
. Remove the portafilter and ensure the tablet
has completely dissolved. If the tablet has
not dissolved; repeat from step of the
cleaning cycle until the tablet is dissolved.
. Once the tablet has completely dissolved,
remove the cleaning disc, reinsert the
portafilter and press the CUP button to
rinse the brew head. It is recommended to
place a container under the portafilter spout
to avoid water splashing onto the machine.
Once complete, make sure to wipe o any
splashes with a soft dry cloth.
Loading ...
Loading ...
Loading ...