Loading ...
Loading ...
Loading ...
5 6
1. Coffee Bean Hopper Lid
2. Coffee Bean Hopper
3. Removable Upper Conical Burr
4. Grind Selector Ring
5. Control Panel
6. LED Display
7. +5 SEC Button
8. MAX TIME Button
9. START/STOP Button
10. Stainless-Steel Base
11. Brush
12. Ground Coffee Container Lid
13. Ground Coffee Container
14. Rubber Mat
FEATURES OPERATING INSTRUCTIONS
BEFORE FIRST USE
1. Wash the ground coffee container and lid, hopper (see removal instruction
below), and hopper lid with hot soapy water, rinse, and dry thoroughly.
2. Replace the hopper (see instructions below).
3. Wipe down the base with a damp cloth.
HOW TO DETACH AND ATTACH THE HOPPER
Before removing or replacing the hopper, make sure the coffee grinder is unplugged.
To Detach:
1. Press the release lever on the back of the grind selector ring.
2. Rotate the hopper counterclockwise until the unlock icon ( ) aligns with the
up arrow ( ) on the lever, then lift the hopper up.
To Attach:
1. Set the hopper on the base, aligning the unlock icon ( ) with the up arrow ( )
on the lever.
2. Rotate the hopper clockwise, until the lock icon ( ) aligns with the up arrow ( ).
You should hear the hopper click into place.
NOTE: If the hopper is not fully attached, the coffee grinder will not work. Particles
of coffee on the upper burr may prevent the hopper from locking into place; if this
is the case, remove the hopper and use the brush to clean off the burr before
replacing the hopper.
1
2
6
5
7
8
9
4
10
12
13
14
3
11
Loading ...
Loading ...
Loading ...