Loading ...
Loading ...
Loading ...
33
EN
duration of the selected cycle will be
automatically modified, to optimise the
temperatures used in the rinsing phase,
enabling a significant reduction in energy
consumption. Opening the door in the last
stage of drying allows air to recirculate,
thereby eliminating the risk of unpleasant
odours.
When the door opens, the "AUTO DOOR"
message will appear on the display.
CHILD LOCK
CHILD LOCK ACTIVATION
The dishwasher is equipped with an
electronic child lock. Child protection
disables commands, thereby preventing
unwanted or accidental changes from being
made.
Child protection can be activated or
deactivated as follows:
1. Turn on the dishwasher on by pressing
and holding the "ON/OFF"
button.
2. Press the "CHILD LOCK" button for
about 5 seconds.
3. The display will show "CHILD LOCK
ON" and a short beep will be heard.
4. Only the "ON/OFF" button will
remain active.
5. Each time you press the disabled keys,
the display will show "LOCK".
CHILD LOCK DEACTIVATION
1. Press the "CHILD LOCK" button
for about 5 seconds.
2. "LOCK OFF" will appear on the display
and a short beep will be heard.
When the "SALT" message appears on the
display or, where present, the relative light
comes on
, fill the tank (see chapter
"ADDING THE SALT").
When the "RINSE AID" message appears
on the display or, where present, the
relative light comes on
, fill the tank
(see chapter "ADDING RINSE AID").
It may happen that it becomes necessary to
fill the SALT and RINSE AID container at
the same time. When selecting programs,
the display will show "SALT - RINSE AID",
until SALT and RINSE AID is added.
NO SALT and NO RINSE AID
warning light
If the RINSE AID level is set to 0, this
will never happen.
"NO RINSE AID" warning light
If the softener level is set to 0, this will
never happen (see chapter
on setting
the softener).
"NO SALT" warning light
Turning off the machine with the "ON/
OFF" button, w
ill activate the child
protection the next time the machine is
switched on.
WARNING:
With this option selected, you must
not in any way prevent the door from
opening or force it to close so as not
to damage the mechanism. Leave the
space in front of the door free and
before closing it, wait for the opening
device to reactivate.
This option will be automatically active
in the "ECO" programme. There is
however the option to deactivate it.
Loading ...
Loading ...
Loading ...