Loading ...
Loading ...
Loading ...
20
9. LOADING THE RINSE AID
(Fig. A "3")
Rinse aid, which is automatically released
during the last rinsing cycle, helps the
dishes to dry quickly and prevents spots
and stains forming.
The rinse aid container is next to the
detergent container (fig.A "3").
To open, press the tab on the lid of the
rinse aid dispenser and lift it.
Add rinse aid up to the Max. indication.
If the rinse aid spills out, remove it from
the wash tank.
Spilled rinse aid can cause excessive
frothing during the wash cycle.
Close the lid of the rinse aid dispenser.
The lid clicks into the locking position.
Always use rinse additives that are suitable
for automatic dishwashers.
Models equipped with display or
rinse aid indicator (only on some
models)
When it becomes necessary to fill the rinse
aid container, the display will indicate the
lack of rinse aid (in models with display), or
the designated indicator light on the
dashboard will turn on.
Adjusting the amount of rinse aid
1. Switch on the appliance, press
ON/OFF"
button.
2. Hold the "SETTINGS (5Sec.)"
button, a short beep will sound.
3.The "SETTINGS" message appears on
the display.
4. Press the "PROGRAMME SELECTION"
buttons to navigate the
submenu.
5. Choose the "RINSE AID" option.
6. Press "START/RESET" to access
the regulation levels.
7.
Press "PROGRAMME SELECTION"
to choose the value (R1……R6).
8.Press "START/RESET"
to confirm.
9. Press "ON/OFF" to confirm.
ALWAYS start the procedure with the
dishwasher turned off.
This has been factory-set to level 4, as
this satisfies the majority of users.
Filling the rinse aid container
Rinse aid
Loading ...
Loading ...
Loading ...