Loading ...
Loading ...
Loading ...
en Faults and what to do about them
42
Information on the display panel
Display Cause/Remedy
Õ ■ Flashes fast + warning signal: The door was opened and the water level is
too high. Close the door, continue the programme with A Start/Reload button
or select 0 Spin programme.
■ Flashes slowly: The door lock temperature is too high to open the door. Wait
approx. 30 seconds until the door lock temperature cools down.
r ■ Flashes (no water supply): Tap turned on? Water inlet filter blocked? Clean
the water inlet filter.
If an additional water filter has been installed (depending on the model), check
for contaminants and clean if required ~ separate installation and cleaning
instruction for water filter.
Water hose kinked or blocked?
■ Lights up (low water pressure): For information only. This will not affect the
programme progress. The programme duration is extended.
E:18 Drain pump blocked; clean the drain pump. Clean the drainage hose on the siphon.
Other displays Switch off the appliance, wait for five seconds and then switch it on again. If the dis-
play appears again, call customer services.
Loading ...
Loading ...
Loading ...