Loading ...
Loading ...
Loading ...
en Operating the appliance
32
Aqua Plus
(Z Aqua Plus)
Additional rinse cycle depending on the
programme; longer programme length
for particularly sensitive skin and/or for
areas with very soft water.
Soak
(% Soaking)
Before the main wash cycle starts, the
washing remains for longer in the water
to partially dissolve intensive soiling.
Notes
■ Put detergent in dispenser I before
starting the appliance.
■ Load laundry of the same colour.
■ If your appliance does not have this
additional programme setting, you
can soak as follows:
1. Put detergent in dispenser II before
starting the appliance.
2. Select the i Cottons 40 °C
programme and the A Start/
Reload button.
3. Select the A Start/Reload button
after approx. 10 minutes. The
laundry remains in the soaking
solution.
4. Leave the laundry to soak for as long
as required, then either select the
A Start/Reload button again to
continue the programme or change
the programme.
1 Operating the
appliance
Operati ng the appliance
Note: Install and connect washing
machine properly.
Before the 1st wash ~ Page 18
Preparing the washing
machine
Notes
■ Never switch on a damaged
washing machine!
■ Inform customer service!
1. Connect the mains plug.
2. Turn on the tap.
3. Open the door.
4. Check that the drum is completely
emptied. Empty if necessary.
Select programme/switch on
the appliance
Note: If you have activated the
childproof lock, you must first deactivate
it before you can set a program.
Use the program selector to select the
required program. Can be rotated in
either direction.
The appliance is switched on.
Loading ...
Loading ...
Loading ...