Loading ...
Loading ...
Loading ...
Morton
®
Water Softener Installation & Operation Manual 11
FIG. 16
Clean Reminder
The screen in Figure 16 appears, with “CLEAn” flash-
ing in the display, when four months have elapsed on
the system’s timer since start up or the last reset.
This is a reminder to use Morton
®
MWSC Water
Softener Cleanser three times a year. To reset the
timer, press any button on the control panel and
“CLEAn” will disappear.
Program the Softener
When the power supply is plugged into the electrical
outlet, the model code (o45P) and a software version
number (example: r4.4), are briefly shown in the face-
plate display. Then the words “SET TIME” appear
and “12:00 PM” begins to flash.
NOTE: If “- - - -” shows in the display, press the
r UP or s DOWN button until the model
code shows in the display. Then, press the
SELECT button to set, and change to the
flashing “SET TIME" display.
Step 1. Set Time of Day
If the words “SET TIME" do not show in the display,
press the SELECT button several times until they do.
Programming the Water Softener
FIG. 17
FIG. 18
continued on next page
FIG. 15
RECHARGE
button
CONNECTION
STATUS light
UP button
DOWN
button
SELECT
button
Display
Loading ...
Loading ...
Loading ...