Loading ...
Loading ...
Loading ...
English ZERO
+
FILTER CARE
3. Filter Assembly and Replacement
Filters should be re-installed in the reverse order of their removal.
①
Insert the replacement
3 True HEPA filter (rear)
2 Deodorization filter (middle)
ˍ
Remove the protective plastic wrap from
new filters. Operating the unit without
removing the protective plastic wrap
may cause abnormal noise, deformation,
or fire as a result of overheating.
Deodorization
lter
True
HEPA lter
②
Insert the 1 Pre-filter (front).
ˍ
To install the pre-filter, insert bottom
tabs into the slots on either side of
the lower part of the unit, then rotate
upward to insert the upper tabs into
the slots at the top part of the unit until
both sides audibly click into place.
③
Replace the front panel by first inserting
the latch at the bottom edge into the
base of the unit, then rotate the panel
upward toward the top of the unit until it
magnetically snaps closed.
Latch
④
After replacing the filters, power on the unit.
Once the unit running, press and hold the
RESET button for 5seconds.
Loading ...
Loading ...
Loading ...