Loading ...
Loading ...
Loading ...
Care & Cleaning
To Remove and Replace Oven Door
To Remove Oven Door:
1. Open the door.
2. Remove screws located on the inside ofthe oven door near the hinges A (one
on each side.)
3. Close the door tothe quarter-open position. Grasp the doorfirmly on both sides
and lift up and offthe hinges.
4. To clean oven door, follow the instructionsprovided in the Care & Cleaning
table.
To Replace Oven Door:
1. Be sure the hinge arms are in the quarter-open position. Be careful ifpulling
the hinges open by hand. The hinges may snap back against the oven frame
and could pinch fingers.
2. Hold the door at the sides near the top. Insert the hinge arms into slots at the
bottom of the door.
3. Hinge arms must go into the range slots evenly. The hinge arms should be _5_
inserted into the bottom corners of the door as far as they can go. F,_
4. If the door is not in line with the oven frame, remove itand repeat the above (jt_
steps.
The door isheavy. For safe, temporary storage, lay the door flat with
the inside of the door facing down.
13
Loading ...
Loading ...
Loading ...