Loading ...
Loading ...
Loading ...
M985041 (3/20)
- 4 -
3
3
2
1
4
REPLACE OR INSTALL FILTER
• Remove plastic wrap from FILTER (2). Remove FILTER LABEL (5). Minor particles found outside the lter are normal.
Rinse the lter.
• Unthread Filter Cover (1) from Filter Housing (3).
• Replace or install Filter (2). The Filter is a snap t onto Filter Cover (1) and can be installed by pushing or removed by pulling.
NOTE: Filter orientation must be maintained as in Figure A. O-rings on FILTER (2) face away from
FILTER COVER (1).
• Thread Filter Cover (1) onto Filter Housing (3). To ensure American Standard Logo (4) is upright after threading,
begin threading with the Logo (4) upsided down. Alternatively, the CIRCULAR MARKING (6) on the lter cap should be
aligned with the matching CIRCULAR MARKING (7) on the lter housing before threading as in Figure B.
• Allow cold water to run through the new lter to ush the system fo 1 minute.
NOTE: Filter life is approximately 4 months. Based on a usage of a hosehold of 4 showering once per day for 6 minutes per
shower. Total capacity is 5000 gallons.
7
6
FIGURE BFIGURE A
2
5
1
Loading ...