Sharp FU-A80E-W 62m² Air Purifier

OPERATION MANUAL - Page 12

For FU-A80E-W.

PDF File Manual, 40 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
E-10
TROUBLESHOOTING
Before calling for service, please review the Troubleshooting chart below, since the problem may not
be a unit malfunctions.
PROBLEM SOLUTION (not a malfunction)
The unit leaves smoke and
odours in the air.
Clean or replace the filters as needed. (Refer to E-9)
Is the unit installed in a location that is difficult for the
sensor to detect cigarette smoke?
Are the dust sensor openings blocked or clogged?
(In this case, clean the openings.) (Refer to E-8)
A clicking or ticking sound is
heard from the unit.
Clicking or ticking sounds may be audible when the unit
is generating ions.
A bad odour comes out of the air
outlet.
Check to see if the filters are heavily soiled. Replace the
filters. (Refer to E-9)
Plasmacluster Air Purifiers may produce a slight odour.
This is normal and is a result of the Plasmacluster Ions
refreshing the air.
The Clean Sign is green, but
there is still odour in the air.
The air could be impure at the time the unit was plugged in.
Unplug the unit, wait one minute, and plug the unit in again.
The Clean Sign illuminates yellow
or red, but the air seems clean.
• Clean the dust sensor with a vacuum cleaner, as it may
be blocked or clogged.(Refer to E-8)
The Clean Sign doesn’t light on.
The Light Control is selected.
Press
for 3 seconds to light on.
The Clean Sign lights change
colour frequently.
The Clean Sign lights automatically change colours as
impurities are detected by the dust sensor.
The unit does not turn on.
The CHILD LOCK mode is selected.
Press
for 3seconds
AUTO RESTART
After a power failure, automatically
resume the operation when the
power recovers.
Auto Restart can be set.
Even when the plug is unplugged or the breaker is thrown
during the operation, the operation resumes at the previous
operation mode and settings if the power recovers.
(with the unit OFF)
ON
(with the unit OFF)
CANCELLATION
(simultaneously for more than 3 sec.)
If the , , lamp lights up for
10 seconds, the setting is complete.
(simultaneously for more than 3 sec.)
OP_FU-A80E-EN+CL+ML.indb 10OP_FU-A80E-EN+CL+ML.indb 10 8/4/11 5:06:48 PM8/4/11 5:06:48 PM
Loading ...
Loading ...
Loading ...