Loading ...
Loading ...
Loading ...
INSTRUCCIONES
DE
OPER.A_c
1.
To
adjust the tilt angle
of
fan head upward or downward by simply moving the guard up
or
down.
2. For a vertical angle, pull the operating knob until the desired angle is achieved.
3.
Pu
ll
the rope to choose the desired speed (high-medium"low-off). Pull the rope to turn
off the fan.
1.Grasp plug and remove from the receptacle
or
other outlet device. Do not unplug by
pulling
on
cord
2.
0pen
fuse cover. Slide open fuse access cover on top
of
attachment plug towards blades,
(see fig.5)
3.Remove fuse carefully. Remove the
fuse
by
prying it out carefully, (see fig.6)
4.Risk
of
fire. Replace fuse only with 5Amp max, 125 Volt fuse.
5.Ciose fuse cover. Slide closed the fuse access cover on top
of
attachment plug, (see fig.?).
6.Risk
of
fire. Do not replace attachment plug. Contains a safety device (fuse) that should
not be removed. Discard product if the attachment plug
is
damaged.
Fig: 5 Fig:6 Fig:?
Tips: Do not overexert when replacing the fuse or damage may occur.
If
it's hard to close the
access cover, make sure the fuse is fully inserted.
1.Be sure to unplug from the electrical supply source before cleaning.
2.Piastic parts should be cleaned with mild soap and damp cloth
or
sponge. Thoroughly
remove soap film with clean water.
3.Be sure not to get water
or
other liquid into the motor.
Fig:
11