Loading ...
Loading ...
Loading ...
18 19
Packaging
Top Rail
Fig. A
Fig. B
Fig. C
Vinyl-Clad Window
The lower sash must open sufficiently to allow a clear vertical opening of 13 inches (330 mm).
The side louvers and the rear of the AC must have clear air space to allow enough airflow through
the condenser for heat removal.
WARNING: The rear of the unit must be outdoors. It should not be inside a building or garage.
Mounting Hardware Qty
3/4" Screw 7
Frame Lock
(for wooden window)
2
Frame Lock
(for vinyl-clad window)
2
Sash Lock 1
Window Sash Seal Foam 1
2. PREPARE THE AIR CONDITIONER
The Top Rail must be assembled prior to installing the Air
Conditioner in the window.
Tools Needed: Phillips Screwdriver
Top Rail Hardware Qty
3/8" Screw 4
Top Rail 1
Weather Stripping
(10 × 3/4 × 1/12")
1
Aaching the Top Rail to the Air Conditioner
1. Remove the Air Conditioner from the carton and place it
on a flat surface.
2. Remove the Top Rail and Weather Stripping from the
packaging material (See > Fig. A)
3. Align the hole in the Top Rail with those in the top of the
unit (See > Fig. B)
4. Secure the Top Rail to the unit with the 3/8” Screws
(See > Fig. C)
NOTE:
• For safety reasons, all the four (4) screws MUST
be securely fastened.
• The Top Rail hardware is pre-installed for units
more than 10000 BTU/h. Before installing this unit,
the Top Rail must be assembled on the unit
(For < 10000 BTU/h models only).
NOTE: For safety reasons, all 4 screws
must be fastened to the Top Rail.
Installation Instructions Installation Instructions
Offset
Exterior
Wall
Inner
Window
Sill
Interior
Wall
W
H
Loading ...
Loading ...
Loading ...