Loading ...
Loading ...
Loading ...
16 17
1. Check for anything that could block the airflow. Check the area outside the window for things such
as shrubs, trees, or awnings. Check the area inside the window to make sure curtains, drapes, or
blinds will not block proper airflow.
2. Check the available electrical outlet. The power cord must be the same as shown on the rating label
of the unit. The outlet should be close enough to the power cord.
3. Carefully unpack the Air Conditioner. Remove all packing material and make sure the floor is
protected when unpacking your unit. Due to the large size of this Air Conditioner, two people are
required to move the unit.
4. Please read all instructions prior to installing your Air Conditioner. Two people are required to install
this product. If a new electrical outlet is required, have the outlet installed by a qualified electrician
before installing the unit.
1. WINDOW REQUIREMENTS
Before installing the unit, check the dimensions of your window to make sure the Air Conditioner will fit.
This unit is made to fit inside a standard double-hung window with an opening width of 23 to 36 inches
(584mm to 914 mm). Make sure that the window is in good shape and able to hold the necessary screws
firmly. Ifnot, make the necessary repairs prior to installing the unit.
Model 6000~8000BTU/h 10000~14500BTU/h
H 14" (356mm) 15–1/2" (394mm)
W 23–36" (584–914 mm)
• Wooden Window
IMAGE PART
Medium Philips Screwdriver
Flat Head Screwdriver
Level
Pencil
Ruler or Tape Measure
Scissors or Knife
NOTE: Save the product
packaging and installation
instructions for future
reference. Store the Air
Conditioner in the product
box when not in use for an
extended period of time.
WARNING: Do not, under any
circumstances, cut or remove
the third (ground) prong from
the power cord.
Do not change the plug on
the power cord of the Air
Conditioner.
Aluminum house wiring may
present special problems –
consult a qualified electrician.
Installation InstructionsInstallation Instructions
Offset
Exterior
Wall
Inner
Window
Sill
Interior
Wall
W
H
WARNING
When handling the unit, be careful to avoid cuts from the sharp metal edges and aluminum fins
on the front and rear coils.
Refer to the: “Operation of the Current Detection Device” instructions during installation
(See > Page 8).
TOOLS NEEDED NOT SUPPLIED PRIOR TO INSTALLING THE AIR CONDITIONER
Loading ...
Loading ...
Loading ...