Loading ...
Loading ...
Loading ...
ge.com (U.S.)
Careand cleaning of the range, www.OEAppliances.ca(Canada)
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is reengaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective
shipping film with yore" finge_ and slowly
peel it fl'om the appliance suHi_ce. Do
not use any sha_]) items to remove the
fihn. Remove all of the fihn beiore using
the appliance for the fit,st time.
To aSStlre no dai/lage is done to the
finish of the product, tile safest way to
remove the adhesive ti'om packaging tape
on new appliances is an application of a
household liquid dishwashing demIgent.
Apply with a soft cloth and allow to soak.
NOTE" The adhesive must be removed from all
parts.It cannot be removed if it is baked on.
Frontr gn[ Burnerionsomemoaels
Burnercau
Burnerhead
Burnerbase_x_._j__
Make sure me hole m the burner
head Is oositioned overthe electrode
and that the burner head is Fullj
inserted inside the bL _nerbase.
A small gap between the base
and head is normal
Frontr gn[Burner3nsortieRlooels Front
eft I:Jrner.DaCKngntBurneranubackleft
burner
Stab' Iv"_'_ _ ! Useasewing
cnamDel neealec
_VJS[-IIB _[0
) unaogme
smallhoiein
ne burner
Burnerbase "Electrode nea_.
Make sure the slot m me burner
neaa /spositioned over the e_ectrode.
The burner cap has three to Foutpins.
Whenreplacing the cap, make sure
none of the pflTssits in the stabiliB"
chambe_
CAUTION:DO NOT OPERATETHE
BURNER WlTHOUTALL BURNER
PARTSIN PLACE
Burner Caps and Heads
The burner assemblies should be washed
regularly and, of comse, after spillovei_.
Turnall controlsoff beforeremowng burnerparts.
The burner grates, burner heads and
btlrnei" c}lps C}li1 be rei//oved _'i)i" easv
cleaning.
The electrode of the spark ignitor is
exposed be)ond the smti_ce of the
burner base. _._q_en cleaning the cooktop,
be careflll not to snag the electrode of
tile si)ark igniter, with your, cleanim*
cloth. Dama_m_ to the igniter could occm:
Toavoidsnagging a clothonthespark
igniter, leave the burner heads in place
when cleaning the cooktop.
Be careful not to push ill any cooktop
controls while cleaning the cooktop.
A slight electrical shock might result
which could cause you to knock over
hot cookware.
Wash burner parts with an alli)uq)ose
non-;ibr;isive cleaner and W;lllll wateI:
Soak stubborn soil. DIw thenl with a
cloth--<lo not reassemble while wet.
To reassemble, replace the burner head
fii_t, then the burner cap and finally the
burner grate.
Make sure that the heads and caps are
replaced ill the correct locations. There
is one small, one mediunl, one laIge
and one extra lmge burner head
and cap.
i k ΒΈ /
Medium burner Smallburner
healand cap headand cap
_t
, ,
headandcap o so _ odes
Extra large burner
head and cap
33
Loading ...
Loading ...
Loading ...