Loading ...
Loading ...
Loading ...
176
z The High-Power Flash will not fire under the following
circumstances.
- When shooting in mode
- When [Flash Sync] is on [2nd-curtain]
- When [Flash Adjust] is on [Manual]
z The flash charge time will lengthen as the battery charge
gets weaker. Always set the power/mode switch to off
when you finish using the flash.
z Be careful not to touch the flash window or sensor
windows with your fingers while the flash is in use.
z The flash may fire if another flash is being used in close
proximity.
z The High-Power Flash may not fire outdoors in daylight or
when there are no reflective items.
z For continuous shooting, although the flash fires for the
first shot, it does not fire for subsequent shots.
z Fasten the attachment screws securely so that they do not
loosen. Failure to do so may lead to the dropping of the
camera and flash resulting in damage to both.
z Before attaching the bracket to the flash, check that the
lithium battery (CR123A or DL123) is installed.
z To illuminate the subjects properly, install the flash so that it
is up against the side of the camera and parallel with the
camera’s front panel.
z A tripod can be used even when the flash is attached.
Loading ...
Loading ...
Loading ...