Loading ...
Loading ...
Loading ...
18
① Insert the DB25 jumper into the banana plug, tighten the screw.
② Insert the banana plug into the corresponding port of GT100+ by following the OBD1 protocol.
③ Connect the OBD2 port of GT100+ to the diagnostic tool.
④ When there is a good communicating between the car and the diagnostic / programming / coding
tool, GT100+ protocol indicator will turn on or blink to indicate which protocol of the car module
and the communication status.
11.) GT100+ will convert the OBD1 port of special truck to the standard OBD2 diagnostic port
according to the protocol.
Steps:
① Insert the DB25 jumper into the banana plug, tighten the screw.
② Insert the banana plug into the corresponding port of GT100+ by following the truck OBD protocol.
③ Connect the OBD2 port of GT100+ to the diagnostic tool.
When there is a good communicating between the car and the diagnostic / programming / coding tool,
GT100+ protocol indicator will turn on or blink to indicate which protocol of the car module and the
communication status.
12.) For BMW-CAS4/CAS4+Programming Test Platform, it’s used to test whether the programmed
Loading ...
Loading ...
Loading ...