Loading ...
Loading ...
Loading ...
16
Uninterruptible Power Supply Connecting Mode Operation Steps
① Prepare a spare battery “A” and a new battery “B” to be installed.
② Connect to NO.16 /4 /5 holes of Godiag GT100+ and the OBD2 diagnostic port of the car, and
connect to the spare battery “A”.
③ Switch on GT100+ Power.
④ Connect GT100+ diagnostic cable to the OBD2 port of the vehicle. [Notes: do not turn on the
ignition or start the vehicle.]
⑤ Install the new battery “B”
9.) The OBD2 cable of GT100+ is as long as 1.4 meters, which will solve the problem that the
diagnostic tool cable is not long enough or the vehicle diagnostic port is too narrow to connect. Please
connect GT100+ first, turn on the power switch and you will see the voltage on the screen which can
tell whether the power supply of the vehicle is normal. [Which keep away the risk of burning out the
diagnostic & programming tool due to the modified vehicle OBD2 port]
Loading ...
Loading ...
Loading ...