Loading ...
Loading ...
Loading ...
About reversing the door.
Reversing the Door
Toolsneeded.
[] Standard #2 [] Tape-tipped
Phillipsscrewdriver putty knife
-'11Openthe door and remove the filler plugs opposite the
hinges.With the doorcompletely open,remove the bottom
screw from each hinge on the dryer face. Insert these
screws about halfway into the TOPholes,for each hinge,
on the opposite side (whereyou removed the filler plugs).
Applyfirm pressureto get the screw started in new holes.
[2-1Loosentop screwfrom each hinge on the dryer face half
way. With one hand holding the top of the door and the
other hand holding the bottom, remove the door from the
dryer by lifting it UPand OUT.
[] Removethe blind plate from the hinge side of the dryer by
removing its two screws. Removethe strike plate from the
opposite side of the dryer by removing its two screws.
Reinstallthe plates,on the opposite sides,using two screws
in each plate.
REMOVE 4 PLUGS AND KEEP
FOR INSERTION INTO r,,,.
__THEOPPOSITE SIDE
REMOVE BOTTOM SCREW FROM EACH HINGE
AND INSTALL HALF WAY INTO EACH TOP OF
OPPOSITE___L_HINGEHOLES ____1
STRIKE BLIND
PLATE PLATE
r_ Rotatethe door 180°. Insertit on the opposite sideof the
opening by moving the door IN and DOWN until the top
hinge and the bottom hinge are restingonthe top screws
inserted in step 1.
rs] Removethe remaining screws from the sideof the opening
from which the door was removed. With these screws,
secureeach hinge at the bottom. Tightenthe two top screws
of each hinge. Reinsertthe plastic plugs on the side from
which the door was removed.
ROTATE DOOR 180 ° AND HANG
INSTALLANDTIGHTEN BOTTOM INSERT PLUGS
SCREWS AND TIGHTEN TOP INTO HOLES ON
)_ OPPOSITE SiDE
_a
8
Loading ...
Loading ...
Loading ...