Loading ...
Loading ...
Loading ...
- 5 -
notch on the Reversing Switch (18)-refer to fig.1.Jack up the nose until it
comes into contact with the load at the desired point of the lift. Pause at
this stage and check to ensure no obstacles to a clean lift.
2. Pull down firmly and evenly on the handle and observe the load rising
As the handle is pulled down, you will hear the climbing pin(15) click
into place as it locates in a hole in the steel bar(3). At this point, relax the
handle allowing the pin(15) to take the load, Raise the handle to the top
of its stroke to take a fresh purchase, and pump the handle once again.
IMPORTANT:
1. Do not use extensions on the handle.
2. Always keep a firm hold on the handle.
B.TO LOWER A LOAD
IMPORTANT: The jack must be loaded with a minimum of 50kg(110 lbs) to
lower step by step; otherwise, the lifting nose will drop.
Taking all necessary precautions, take the load with the jack (i.e., jack the
load up slightly), and ensuring the handle is in the FULLY UPRIGHT
position, trip the Reversing Latch (20)so that it is in the "Down" position,i.e.,
the indentation on the Latch, becomes disengaged from the notch on the
reversing Switch (see fig.2). Keeping a firm grip on the handle, pump it as
you would for 'raising a load.'
5.Scope of application
Farm Jack
Loading ...
Loading ...