Loading ...
Loading ...
Loading ...
- 3 -
Basic Safety precautions
1.Be sure the base of the jack is on firm and level ground.
2. Be sure the jack will not slip after the load is applied.
3. Be sure the lifting arm is fully under load is applied.
4. Be sure the load is stabilized before lifting so it will not shift when lifting
or lowering.
5. Do not work under the vehicle after lifting unless you have jack stands
supporting the vehicle.
6. Do not push the load off the jack; lower it carefully.
7. Do not use handle extensions.
8. Do not carry the jack by the handle.
3. Product structure diagram
Part List:
1.Top Clamp-Clevis Bolt 2.Top Clamp-Clevis
3.Steel Standard(Bar) 4.Steel Handle w/Cotter Pin
5.Handle Socket 6.Pin
7.Hex Bolt 8.Connecting Rod
9.Small Runner 10.Screw Bolt
11.Base 12.Climbing Pin Spring (2 required)
13.Climbing Pin (2 required)
14.Cross Pin (2 required)
15.Reversing Switch Cam Bar and Spring
16.Cap Screw w/Washer
17.Reversing Latch
18.Reversing Switch Spring
19.Large Runner
20.Running Gear (assembled)
Loading ...
Loading ...
Loading ...