Loading ...
Loading ...
B
The intended use and ambient conditions for this device
This device is intended for the rendering of video and audio signals, on a table-top, in a home or ofce environment. It must not be
used in rooms with a high level of humidity or dust concentration. The warranty is only valid if used as intended by the manufacturer.
WARNING
High humidity and dust concentration may lead to current leaks in the device. To reduce the risk of re or electrical shock:
- Do not expose this unit to rain, moisture, dripping or splashing water, and do not place objects lled with liquids, such as vases,
cups, etc. on or over the unit.
- Do not touch the device with wet hands.
- Do not expose to direct air-conditioning and keep candles or other naked ames away from the device at all times.
If the device is moved from a cold environment to a hot environment, leave it switched off for at least an hour to avoid condensation.
If used outside, make sure it is protected from moisture.
If you notice anything unusual, immediately remove the power plug.
In case of re, use preferably a CO
2
gas or powder re extinguisher. If such extinguishers are not accessible, try to isolate the electrical
supply before using a water re extinguisher.
Never place a Laser Cinema in an unstable location. A Laser Cinema may fall, causing serious personal injury or death. Many
injuries, particularly to children, can be avoided by taking simple precautions such as:
- Using cabinets or stands recommended by the manufacturer of the Laser Cinema.
- Only using furniture that can safely support the Laser Cinema.
- Ensuring the Laser Cinema is not overhanging the edge of the supporting furniture.
- Not placing the Laser Cinema on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and
Laser Cinema to a suitable support.
- Not placing the Laser Cinema on cloth or other materials that may be located between the Laser Cinema and supporting furniture.
- Educating children about the dangers of climbing on furniture to reach the Laser Cinema or its controls.
If your existing Laser Cinema is being retained and relocated, the same considerations as above should be applied.
Loading ...
Loading ...
Loading ...