Loading ...
Loading ...
Loading ...
Use this feature to adjust the output level of the LFE
(low-frequency effect) channel when playing back a
Dolby Digital or DTS signal. The LFE signal carries the
low-frequency special effect sound which is only added to
certain scenes.
Control range:
SPEAKER ............ -20 to 0 dB
HEADPHONE ..... -20 to 0 dB
Initial setting: 0 dB
U Press via to select the item to be adjusted.
[] Press < to adjust the LFE level.
•Adjust the LFE level according to the capacity of your
subwoofer or headphones.
Use this feature to adjust the delay of the center channel
sounds. This feature works when there is sound output
from the center speaker, with a source like Dolby Digital
or DTS, etc. Ideally, the center speaker should be the
same distance from the main listening position as the left
and fight speakers. However, in most home situations, the
center speaker is placed in line with the main speakers.
By delaying the sound from the center speaker, the
apparent distance from the center speaker to the main
listening position can be adjusted to make it seem the
same as the distance between the main left and right
speaker to the listening position. Adjusting the delay time
for the center speaker is especially important for giving
depth to the dialogue.
Control range:
CENTER .......................... 0 to 5 ms
Initial setting:
CENTER .......................... 0 ms
•Press < />to increase or decrease the delay
of the center channel sounds.
Center speaker image
r--/
/ S \\ \\ Iii z /' _
i
i
\/
• Increasing the delay by 1 ms simulates moving the speakers
about 30 cm (one foot) farther away from the listening
position.
43
Loading ...
Loading ...
Loading ...