Loading ...
Loading ...
Loading ...
10
Operation
m
WARNING! Do not allow familiarity with this product
to make you careless. Remember that a careless fraction of a
second is sucient to inict serious injury.
mWARNING! Always remove battery pack from the tool
when you are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery pack will prevent
accidental starting that could cause serious personal injury.
mWARNING! Always wear eye protection when using the
heat gun. Failure to do so could result in objects being thrown
into your eyes and other possible serious injuries.
mWARNING! Do not use any attachments or accessories
not recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can
result in serious personal injury.
Intended Applications
This heat gun is intended for the purposes listed below:
• Soften paint, caulking and putty for easier removal.
• Soften adhesives to help remove stickers, oor tiles,
wallpaper, etc.
• Shrink tubing for electrical work.
• Shrink plastic lm for wrapping or weatherproong.
Any usage other than the applications listed above may
cause personal injury and property damage, and will void the
warranty.
mDANGER! DO NOT use under wet conditions or in
presence of ammable liquids or gases. DO NOT let children
come into contact with the tool. Supervision is required when
inexperienced operators use this tool.
Starting and Stopping
1. Insert the battery in the battery compartment. Push to
make sure it is locked in place (Fig. 4).
2. To turn the heat gun on, depress the safety lock button.
While the safety lock button is pressed, press the trigger
switch (Fig. 5).
NOTE: The safety lock button reduces the possibility of
accidental starting. It can be depressed from either the left
or right side.
3. When the heat gun is on, release the safety lock button
rst, and release the trigger switch. The heat gun is
equipped with hand-free operation function and it's not
necessary to keep pressing the trigger switch to use the
gun.
NOTE: When the heat gun is just started, it's normal that
smoke is produced from the heat outlet.
4. To turn the heat gun o, press the safety lock button
again.
In order to operate this cordless heat gun you will need an
iON+ 24V System battery and charger. See page 13 for
battery and charger options and specications, or for more
information visit sunjoe.com.
TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
Battery pack
Fig. 4
Battery compartment
Trigger switch
Fig. 5
Safety lock
button
Loading ...
Loading ...
Loading ...