Loading ...
Loading ...
Loading ...
49
Automotive Diagnostic Scanner NT819BT User's Manual V1.0
Figure 9-27 Sample Function Menu Screen
2. A screen with detailed information of the selected control module displays.
Figure 9-28 Sample ECU Information Screen
3. Press to print the information if need be. Press to exit.
4. Press Save to store ECU information screen and Press OK to complete
save or Press Cancel to give up.
Figure 9-29 Sample ECU Information save Screen
9.2.5 Active Tests
Active Tests, also known as Actuator Tests, are bi-directional diagnostic tests
on vehicle systems and component. The tests let you to use the scanner
temporarily activate or control a vehicle system or component, and when you
exit the test, the system/component returns to normal operation.
Some tests display a command to the operator. For example, if “Press Brake
Pedal” displays, the operator has to press and hold the brake pedal and then
continue. The sequence, number and type of tests are dictated by the control
module.
On some systems, the actuator tests cannot be restarted until the ignition key
is switched off for some time. Alternatively, briefly start and run the engine,
shut down, turn the ignition to the run position, then re-initiate the actuator
tests.
Loading ...
Loading ...
Loading ...