Loading ...
Loading ...
Loading ...
10
PROBLEM POSSIBLE CAUSES EASY SOLUTIONS
Small pieces of
ice in the bottle.
Small pieces of ice may appear and quickly melt
in the bottle while carbonating.
• Shorten each press so the eciency
of carbonation is not aected.
Little or no
carbonation.
CO₂ canister may be near empty or empty.
NOTE: Cold water also maximises carbonation.
• Replace the canister with a full one.
• Check the CO₂ canister is properly screwed
into place.
Bottle cannot be
removed from the
FusionCap
™
.
Excess CO₂ has not been fully released. • Turn the red switch on the FusionCap
™
all
the way to the right to release all of the
pressure.
Juice or other
non-water liquids
foam up too
quickly.
Non-water liquids should not be lled passed the
MIN line on the bottle. Varying amounts of sugar
in drinks causes them to react and carbonate
dierently, so short presses on the lever will
minimise over foaming.
• Turn the red switch on the FusionCap
™
back
to the left to slow down the pressure release.
Once foam has subsided, slowly turn
the switch to the center position before
turning all the way to the right.
TROUBLESHOOTING
5.
MAX
30d
Soak the FusionCap
™
every 30 days in max 40°C water for 5 mins
TIP
Loading ...
Loading ...