Loading ...
Loading ...
Loading ...
English
Maintenance
English62
Upper washer
Self Clean
Certain usage and environmental conditions may result in some residue build-up or odor in the washer
tub. To prevent this build-up of residue or odor causing bacteria and keep your washer tub fresh and
clean, perform the Self Clean cycle at least once a month or every 20 cycles. Perform the recommended
procedure below when using the Self Clean cycle.
1. Remove all items from the washer tub and ensure the tub is empty. Laundry left in the tub during the
Self Clean cycle may be damaged.
2. Tap to turn the power on.
3. Tap UPPER.
4. Turn the Navigation dial to select Self Clean.
5. Tap and hold upper .
NOTE
• The water temperature for Self Clean is defaulted to 3 (Warm). This temperature cannot be changed.
• In the case where residue is present in the washer tub, add 1/3 cup (2.7 fl. oz., 80 ml) of liquid chlorine
bleach directly to the empty tub before you start the Self Clean cycle. Do not use or mix any other
detergent or chemicals during the Self Clean cycle.
• If necessary, run a Rinse+Spin Cycle after the Self Clean cycle has completed to help remove any
remaining residue.
CAUTION
• Check the washer tub before using the Self Clean cycle. Remove any remaining water in the tub by
running a Spin Only cycle prior to starting the Self Clean cycle.
• If there is chlorine bleach left in the washer tub for an extended period of time, rust can occur.
Self Clean reminder (
)
• After 20 washing cycles, the Self Clean LED reminder icon and the Self Clean cycle LED will blink on the
control panel for an hour and then turn off automatically.
• The reminder will appear on the control panel for 5 additional consecutive cycles before turning off. The
next reminder will not appear until another 20 cycles have been completed.
Untitled-2 62 2021-05-17 2:04:36
Loading ...
Loading ...
Loading ...