Loading ...
Loading ...
Loading ...
en operation
28
1. Press Start/Reload .
The activated programme end time
is paused.
2. Press Finish in until the display
shows the required programme
end time.
3. Press Start/Reload .
The changed programme end time
is activated.
12.6 Adding laundry
After the programme starts, you can
remove or add laundry at any time.
1. Press Start/Reload .
2. Open the door.
3. Add or remove laundry.
4. Close the door.
5. Press Start/Reload .
12.7 Cancelling the pro-
gramme
1. Press Start/Reload .
2. Open the door.
3. Remove the laundry.
→"Unloading the laundry",
Page28
12.8 Unloading the laundry
1. Open the door.
2. Remove the laundry from the
drum.
12.9 Switching off the appli-
ance
▶ Turn the programme selector to
Off .
12.10 Fluff filter
During drying, fluff from the laundry is
collected in the fluff filter. The fluff fil-
ter protects the appliance from fluff.
Cleaning the fluff filter
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
clean the fluff filter.
Note:If you do not clean the appli-
ance as described, the appliance's
functionality may be impaired.
Requirements
¡ The display shows the following
after drying: "End"
¡ or the display shows the following
during operation: .
1. Open the door.
2. Remove the fluff from the door.
3. Remove the two-part fluff filter.
Loading ...
Loading ...
Loading ...