Loading ...
Loading ...
Loading ...
- 5 -
Maintenance and Storage
1. Stop the engine, disconnect the spark plug and ground it against the engine before cleaning, or
inspecting the machine.
2. Stop the engine and relieve hydraulic system pressure before repairing or adjusting fittings, hoses,
tubing, or other system components.
3. To prevent fires, clean debris from the engine and muffler areas. If the engine is equipped with a
spark arrestor muffler, clean and inspect it regularly according to manufacturer’s instructions.
Replace if damaged.
4. Periodically check that all nuts and bolts, hose clamps, and hydraulic fittings are tight to be sure
equipment is in safe working condition.
5. Check all safety guards and shields to be sure they are in the proper position. Never operate with
safety guards, shields, or other protective features removed.
6. The pressure relief valve is preset at the factory. Do not adjust the valve.
7. Never attempt to move this machine over hilly or uneven terrain without a tow vehicle or adequate
help.
8. For your safety, replace all damaged or worn parts immediately with original equipment
manufacturer’s (O.E.M.) parts only. “Use of parts which do not meet the original equipment
specifications may lead to improper performance and compromise safety!”
9. Do not alter this machine in any manner, alterations such as attaching a rope or extension to the
control handle, or adding to the width or height of the wedge may result in personal injury.
Loading ...
Loading ...
Loading ...