Loading ...
Loading ...
Loading ...
- 11 -
WARNING
Before operating or using the log splitter, review the instructions below and all safety information.
Failure to follow these instructions may result in property damage or injury to the operator or
bystanders.
CONTROL HANDLE
The control handle has two positions Splitting and Return.
SPLITTING: Move the control handle FORWARD to split wood.
RETURN: Release the control handle to RETURN the push plate to its original position automatically.
NOTE: Control handle will return to it original position once the handle is released.
STARTING ENGINE
1. Attach spark plug wire to spark plug. Make certain the metal cap on the end of the spark plug wire
is fastened securely over metal tip of the spark plug.
2. Turn fuel valve, if equipped, to the ON position.
3. Move choke lever, if equipped, to CHOKE position.
4. If the engine is equipped with a primer, follow instructions in the engine manual to prime it.
5. Turn the throttle control handle to the FAST position.
6. Grasp starter handle and pull rope out slowly until engine reaches start of compression cycle (rope
will pull slightly harder at this point).
7. Pull rope with a rapid, full arm stroke. Keep firm grip on starter handle. Let rope rewind slowly.
Repeat until engine cranks.
8. After engine starts, move choke lever (if equipped) to OFF position. Place throttle lever to the
speed desired.
9. In cold weather, run push plate up or down beam 6 to 8 times to circulate the hydraulic fluid.
WARNING: When starting a warm engine, the muffler and surrounding areas are hot use
caution to avoid burns. DO NOT TOUCH.
Operation Instructions
Loading ...
Loading ...
Loading ...