Loading ...
Loading ...
Loading ...
180˚
5. When the bowl is full of water, turn the
filter back and empty the container.
6. Repeat the steps 4 and 5 until the water
stops to flow out.
7. Turn the filter anti-clockwise to remove it.
2
1
8. If it is necessary, remove fluff and objects
from the filter recess.
9. Make sure that the impeller of the pump
can rotate. If it does not rotate, contact
the Authorised Service Centre.
10. Clean the filter under the water tap.
11. Put the filter back into the special guides
by turning it clockwise. Make sure that
you tighten the filter correctly to prevent
leakages.
2
1
12. Close the pump cover.
2
1
1
14.10 Cleaning the inlet hose and
the valve filter
It is recommended to clean both the filters of
the inlet hose and valve occasionally to
remove any deposit, collected over the time:
1. Remove the inlet hose from the tap and
clean the filter.
30 ENGLISH
Loading ...
Loading ...
Loading ...