Loading ...
Loading ...
Loading ...
3 Procedures for close-up flash operation
74
Procedures for triple-light close-up flash operation
1
Press the [ON/OFF] buttons to turn on the camera,
the SU-800 and SB-R200.
• Ensure that the red ready-lights on the SU-800 and
SB-R200 are on.
• Confirm that Wireless flash, Close-up mode and CLS-
compatible camera indicators are correctly displayed
on the SU-800.
2
Selecting triple-light flash operation.
Press and hold the [SEL](FUNC.) button for
approx. 2 seconds to toggle between “dual-light”
and “triple-light” close-up flash operations.
• “Dual-light” is preset when shipped from the factory.
3
Setting the flash mode on the SU-800.
Press the [MODE] button to set the flash mode to
TTL or M (manual).
• “TTL” is preset when shipped from the factory.
• The same flash mode is set for both Groups A and B.
• Only the M (manual) flash mode is available for
Group C.
4
Setting the SB-R200 to fire or cancel.
Press the [A B] select button to set flash firing/
canceled for Group A or B.
• The flash-canceled group name disappears.
• You can cancel flash firing for Groups A and B, but not
for Group C.
• Once set to flash canceled mode, flash output-level
ratio in TTL mode becomes invalid, while the flash
output level compensation values are retained.
• Even if the flash mode is set to flash canceled, flash
output level compensation values in the M (manual)
mode are retained.
Display in triple-light close-
up flash operation
READY
MODE
NO AF-ILL
SE
A
A
B
ON/OFF
READY
LOCK
MODE
NO AF-ILL
SEL
A
B
Loading ...
Loading ...
Loading ...