Loading ...
Loading ...
Loading ...
Hantek1025G
USER’S MANUAL 19
3.2 Waveform Output Control
By the following buttons to control the output dot numbers, trigger mode, output amplitude,
and limit frequency of the wave filter.
Single Wave: Output waveform only once.
-20dB: Attenuation the waveform
Ext Trig: Use the external or internal trigger system.
Wave ON/OFF: Turn the waveform on/off.
Ext Trig Mode: External Trigger Mode (see “External Trigger Input”).
Phase: The phase of the waveform to generate.
Y Offset: The offset of the waveform to generate.
Frequency: The frequency of the waveform to generate (The Frequency Range is
DC~75MHz when generating sine waveform, or DC~25MHz when generating other
waveforms).
Amplitude: The maximum voltage of the waveform to generate.
Loading ...
Loading ...
Loading ...