Loading ...
Loading ...
Loading ...
6
USER MAINTENANCE
If trimmer is not going to be used for a long period of time, store in a safe, cool, dry
place. Do not wrap adapter cord tightly around trimmer. Do not hang the trimmer by
the adapter cord.
The internal mechanism of your trimmer has been permanently lubricated at the
factory. Other than the recommended maintenance described in this manual, no
other maintenance should be performed, except by Andis Company or an Andis
authorized service station. To find an Andis authorized service station near
you log on to andis.com or contact our customer service department at
1-800-558-9441.
CARE OF AND SERVICING OF ANDIS TRIMMER BLADES
Blades should be oiled before, during, and after each use. If your trimmer blades
leave streaks or slows down, it’s a sure sign blades need oil. The trimmer should be
held in the position shown in Figure F to prevent oil from getting into motor. Place
a few drops of Andis Clipper Oil on the front and side of the cutter blades (Figure G).
Wipe excess oil off blades with a soft dry cloth. Spray lubricants contain insufficient
oil for good lubrication, but are an excellent trimmer coolant. Always replace broken
or nicked blades to prevent injury. You can clean the excess hair from your blades
by using a small brush or worn out tooth brush. To clean the blades we suggest to
immerse the blades only into a shallow pan of Andis Clipper Oil, while the trimmer
TRIMMING GUIDE
Description Trimming Direction
Approximate Length
of Cut
Standard Andis Blade
With hair grain
Against hair grain
1/16” (1.6 mm)
1/32” (0.8 mm)
1/16” Blade Attachment #1
With hair grain
Against hair grain
3/16” (4.8 mm)
3/32” (2.4 mm)
1/8” Blade Attachment #2
With hair grain
Against hair grain
1/4” (6.4 mm)
1/8” (3.2 mm)
1/4” Blade Attachment #3
With hair grain
Against hair grain
3/8” (9.5 mm)
1/4” (6.4 mm)
3/8” Blade Attachment #4
With hair grain
Against hair grain
1/2” (12.7 mm)
3/8" (9.5 mm)
Loading ...
Loading ...
Loading ...