Andis 33785 Slimline Pro Corded/Cordless Hair & Beard Trimmer, T-Blade Zero Gapped

USE & CARE INSTRUCTIONS - Page 5

For 33785. Also, The document are for others Andis models: D-8

PDF File Manual, 28 pages, Read Online | Download pdf file

33785 photo
Loading ...
Loading ...
Loading ...
5
The trimmer has not been charged at the factory. Please charge the trimmer for
2 hours before the first use for maximum performance.
You can keep the trimmer plugged into the adapter when not in use. The adapter will
maintain the battery at full charge. The green light will turn OFF when the battery is
fully charged. We recommend that the adapter be unplugged if the trimmer won’t
be used for seven or more days.
USING CHARGING STAND
Plug the adapter cord into the receptacle on the back of the charging stand (Figure B).
Place trimmer in the charging stand. The green light on the charger will turn ON. The
on/off switch on the trimmer must be in the OFF position for the battery to charge.
FAILURE TO CHARGE
1. Make sure voltage is present at the wall outlet (confirm with an appliance you
know is working).
2. Make sure on/off switch on the trimmer is OFF.
3. Check to make sure adapter cord is plugged firmly into trimmer or charging stand.
Twist the adapter cord slightly to ensure good electrical connection.
4. If failure to charge still exists, return trimmer to Andis or an Andis authorized
service station for examination and repair or replacement.
CORDED OPERATION
If the trimmer powers OFF in the middle of a trimming job, the adapter cord can be
attached to continue use in corded operation. When the trimmer is running with the
adapter cord attached, the green light will remain OFF, even if the battery is not fully
charged. The trimmer will not charge while in use with the cord attached.
USING ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
Your trimmer comes complete with 4 attachment combs: 1/16", 1/8", 1/4", & 3/8"
(Figure C). To use, slide front of attachment comb over the teeth of the blade (Figure D).
Snap comb down over back of blade (Figure E).
Use the trimming guide to find the approximate lengths of cut. Different blade
angles in relation to the skin, thickness and texture of the hair will vary the cutting
length.
Loading ...
Loading ...
Loading ...