Loading ...
Loading ...
Loading ...
Use To
Show Bookmarks
Ye s
No
Specify whether bookmarks are displayed from the Held Jobs
area.
Note: Yes is the factory default setting.
Web Page Refresh Rate
30–300
Specify the number of seconds between Embedded Web
Server refreshes.
Note: 120 is the factory default setting.
Contact Name Specify a contact name.
Note: The contact name is stored on the Embedded Web
Server.
Location Specify the location.
Note: The location is stored on the Embedded Web Server.
Alarms
Alarm Control
Cartridge Alarm
Set an alarm when the printer requires user intervention.
For each alarm type, select from the following options:
O
Single
Continuous
Notes:
• Single is the factory default setting. This sounds three
quick beeps.
• Continuous repeats three beeps every 10 seconds.
Timeouts
Standby Mode
Disabled
1–240
Set the amount of time in minutes before the printer enters a
lower power state.
Note: 15 is the factory default setting.
Timeouts
Sleep Mode
Disabled
1–120
Set the amount of time in minutes the printer waits after a job
is printed before it goes into a reduced power state.
Notes:
• 20 is the factory default setting.
• Lower settings conserve more energy, but may require
longer warm‑up times.
• Select the lowest setting if the printer shares an
electrical circuit with room lighting or you notice lights
flickering in the room.
• Select a high setting if the printer is in constant use.
Under most circumstances, this keeps the printer ready
to print with minimum warm‑up time.
• Disabled appears only if Energy Conserve is set to O.
Timeouts
Print with Display
O
Allow printing with display
o
Display on when printing
Print a job with the display turned o.
Note: Display on when printing is the factory default setting.
Understanding the printer menus 85
Loading ...
Loading ...
Loading ...