Loading ...
Loading ...
Loading ...
13
Enclosure Configuration
5
6
7
5
Remove door handle using a Phillips screwdriver to remove the
three screws holding the handle in place.
6
Remove door bumpers and move them to the holes on the opposite
side.
7
Reinstall the door by reversing the steps 5 through 1.
8
Connect LCD: Remove the zip ties securing the cables to the rack.
Connect the COM 1 cable to the LCD, then connect the power
cable to the LCD panel. Bundle the excess cable together and
secure to the door with zip ties.
Note: Make sure to leave enough slack for the door to open fully without
putting stress on the connections.
Bumper
Bumper
Door Handle
Handle
Cover
Bumper
Bumper
Loading ...
Loading ...
Loading ...