Loading ...
Loading ...
Loading ...
12
Enclosure Configuration
Reversing the Front Door
WARNING: Do not attempt to reverse front door without assistance.
1
Remove the door hinges from the enclosure and attach them on the
opposite side of the enclosure.
Note: The alternate door hinge attachment points have plastic plugs in the
screw holes. Remove the plugs and insert them in the original door hinge
attachment points.
2
Unscrew the 2 hinge mechanisms from the hinge openings inside
the door, then reattach each of them using the set of screw holes
immediately opposite their original position.
3
Move the ground wire to the inside of the door, using the attachment
point nearest the hinge at the top of the door (do the same for the
other half of the ground wire on the rack frame). The attachment
point is marked with the ground connection symbol: .
4
Remove door handle cover plate by carefully popping the tabs with
aatscrewdriver.
1
2
4
3
Loading ...
Loading ...
Loading ...