Loading ...
Loading ...
Loading ...
Step 6:
Extend the exhaust pipe to the vent-pipe of
your building or to outside. Try to make the
bend of the exhaust pipe is more than 120°.
5x60
Wood Screw
Expanding Tube
5x60
Wood Screw
Expanding Tube
Step 5:
1.Extend the inner chimney to the height
which you want . And mark the two holes of
the inner chimney’s hook on the wall.
2. Put down t
he inner duct cover gently, usin0-70 mm
depth on the wall which you marked just now.
3. Press the expanding tube into the holes.
4.Extend the inner chimney and tighen it to the
expanding tubes with two 5x60 wood screw .
g 8mm drill to drill two holes in
6
7
Installation For Model PCH 896IR
650-750mm
Step 1:
Fix the position of the chimney in accordance
with the recommended height between
650mm to750mm from the hob and the lower
edge of the chimney.
Air outlet
Reducer for
φ120 out-let
Low support frame
Screws
Blower box assembly
Step 3:
Aiming the Low support frame to the holes
on the blower box assembly , fix it tightly.
Then pull out the exhaust pipe to the level
of the low support frame.
Step 2:
Take out of the chimney from the carton
box and remove the filter,then put it on a
horizontal work table gently. Fix the
reducer to the airout let if needed .
Otherwise fix the exhaust pipe into the air
outlet,make sure is connected tightly.
9
Seguro
Paso 9
Instale el filtro piramidal, insertando los
seguros en los huecos y empuje suavemente
en la dirección A para adecuarlo.
A
Dirección
Precaución antes de cocinar:
Para los modelos PCH990R&PCH960R:
Cuando cocine, no necesita abrir el panel de
acero . Si usted quiere abrir el panel
cuando limpie el mismo, solo ábralo como
muestra la figura siguiendo la dirección que
muestra la fecha. Note que el panel no puede
cerrarse por sí solo después de abrirlo.
vidrio
Agujero de
fijaci nó
Perno de fijaci nó
PCH762DR Y PCH767DR Y PCH797DR
Loading ...
Loading ...
Loading ...