Loading ...
Loading ...
Loading ...
ENGLISH
15
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
Pair and connect a Bluetooth device for the first time
1
Press B SRC to turn on the unit.
2 Search and select the name of your receiver (“KMM-BT332U”/
“KMM-BT38”) on the Bluetooth device.
“PAIRING” “PASS XXXXXX” “Device name” “PRESS” “VOLUME
KNOB” appears on the display.
For some Bluetooth devices, you may need to enter the Personal
Identification Number (PIN) code immediately after searching.
3 Press the volume knob to start pairing.
“PAIRING OK” appears when pairing is completed.
Once pairing is completed, Bluetooth connection is established
automatically.
“BT 1” and/or “BT 2” indicator on the display window lights up.
” indicator lights up to show the strength of the battery and signal of
the connected device.
This unit supports Secure Simple Pairing (SSP).
Up to five devices can be registered (paired) in total.
Once the pairing is completed, the Bluetooth device will remain registered
in the unit even if you reset the unit. To delete the paired device, see
[DEVICE DELETE]
on page18.
A maximum of two Bluetooth phones and one Bluetooth audio device can
be connected at any time. To connect or disconnect the registered device,
see
[PHONE SELECT]
or
[AUDIO SELECT]
in
[BT MODE]
. (Page 18)
However, while in BT AUDIO source, you can connect to five Bluetooth
audio devices and switch between these five devices. (Page19, 20)
Some Bluetooth devices may not automatically connect to the unit after
pairing. Connect the device to the unit manually.
Refer to the instruction manual of the Bluetooth device for more
information.
Bluetooth®
Auto Pairing
When you connect iPhone/iPod touch to the USB input terminal, pairing
request (via Bluetooth) is automatically activated if
[AUTO PAIRING]
is set to
[ON]
. (Page 18)
Press the volume knob to pair once you have confirmed the device name.
Bluetooth — Mobile phone
Receive a call
When there is an incoming call:
[ZONE 2]
illuminates in green color and flashes.
The unit answers the call automatically if
[AUTO ANSWER]
is set to a selected
time. (Page16)
During a call:
[ZONE 1]
illuminates according to the settings made for
[DISPLAY]
(page27) and
[ZONE 2]
illuminates in green color.
If you turn off the unit or detach the faceplate, Bluetooth is disconnected.
KMM-BT332U_K_B5A-3889-00_EN_2nd Draft.indd 15KMM-BT332U_K_B5A-3889-00_EN_2nd Draft.indd 15 8/5/2021 3:55:29 PM8/5/2021 3:55:29 PM
Loading ...
Loading ...
Loading ...