Loading ...
Loading ...
Loading ...
Care & Cleaning
To Raise and Lower the Top for Cleaning
1. Remove burner grates and spitlover bowls. Set aside.
2. Grasp the sides of the cooktop and then lift from the front.
3. Liftthetop high enough to allowthe support rods to snap into place. The Lift-up rods will support the top in its raised position.
4. Clean underneath using hot, soapy water and a clean cloth; then, dry.
5. To lower the range top, grasp the front corner of each side of the top while pushing back on each rod with the heel of your
hand. This will release the notched support. Hold the range top and gently slide the range top down to the range.
_!_,,AV.,!;t_ll_[cllWhen lowering the top,
grasp the sides with fingertips only. Be
careful not to pinch fingers. Also, DO
NOT drop or bend the rangetop when
raising or lowering. This could damage
the surface.
Main Top
Support
Bar
To Remove and Replace Burners for Cleaning
To Remove Burners
1. Remove shipping screws with a Phillips Head screwdriver. See illustrationfor screw locations.
2. Tilt the burner at the end closest to the support bar until the locator tab isreleased (front burners tiltright, rear burners tilt
left). Move the burner toward the back of the range. This will separate itfrom the gas valve at the front of the range.
To Replace Burners
1. S_idethe bumer tube _ver the gas va_veat the fr_nt _f the range (fr_nt burners fit __er the dght _a_ve_rear burners _t _ver
the left valve on each side of the range).
2. Ti_tbumers_thatthe__catingtabwi__s_ideint_thes__t_nthesupp_rtbar_Makesureburnersarepr_per_yseated_nsupp_rt
bar and are level.
3. Replace shipping screws ifdesired.
_!,'AV.,!;t_11_[€11DO NOT turn the burners on when the cooktop is raised for cleaning. Be sure that the top iscompletely lowered
and securely in place before turning on the burners.
12
Loading ...
Loading ...
Loading ...