Loading ...
Loading ...
Loading ...
33
Parameter Description
Record
●
Record: Select the channel number. The system can link record
channel when an alarm event occurs.
●
Record Delay: After alarm, the system stops recording after an
extended time period according to the configured time.
●
To use the record linkage function, configure record plan for
motion detection alarm and enable auto recording in record
control. For details, see "6.3 Storage".
●
For the configuration of storage path, see "6.1.2.5 Configuring
Storage Path".
Relay-out
●
Relay-out: When an alarm is triggered, the system can
automatically link with relay-out device.
●
Alarm Delay: When alarm delay is configured, the alarm continues
for an extended period after the alarm ends.
Before enabling this function, make sure that you have connected
alarm devices (such as light and siren) to the Camera.
Send Email
When an alarm is triggered, the system will automatically send an email
to users.
Email linkage takes effect only when SMTP is configured. For details, see
"6.2.7 Configuring SNMP".
Audio
●
The system broadcasts alarm audio file when an alarm event
occurs.
●
Play mode: Select and configure
Play Duration
and
Play Count
according to the play mode.
●
File: Select
Setting
>
Camera
>
Audio
>
Alarm Audio
to set alarm
audio file.
Warning Light
When an alarm is triggered, the system can automatically enable the
warning light.
●
Mode
: The display mode of the warning light when an alarm is
triggered. It includes
Normally on
and
Flicker
. When setting
Flicker
as the mode, you need to set the flicker frequency.
For the Camera with red and blue alarm light, you can only select
Flicker
in
Mode
.
●
Duration
: After setting warning light duration, the warning light is
turned off after an extended time of period after an alarm. It is 5
seconds–30 seconds.
●
Period
: The period for using warning light. When an alarm
triggered during the configured period, the system links warning
light. For the configuration, see "5.1.2 Setting Period".
Loading ...
Loading ...
Loading ...