Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/79595855-tpc-bf5601-t-s2-v2/bg97.png)
142
Figure 6-79 Network access
1. Select the mode:
Allowlist
and
Blocklist
.
2. Click
Add IP/MAC
.
Figure 6-80 Network access
3. Configure the parameters.
Table 6-32 Description of adding IP/MAC parameters
Parameter Description
Rule Type
Select IP address, IP segment, MAC address or all IP addresses.
●
P address: Select IP version and enter the IP address of the host to
be added.
●
IP segment: Select IP version and enter the start address and end
address of the segment to be added.
●
MAC address: Enter MAC address of the host to be added.
●
All IP addresses: Set all IP addresses in allowlist or restricted list.
Device All Ports Set access ports. You can select all ports or the ports in defined areas.
●
Device all ports: Set all IP port in allowlist or Blocklist. When
selecting
BlocklList
in
Mode
, and
All IP Address
in
Rule Type
,
you cannot select the
Device All Ports
checkbox.
●
Device start server port and Device end server port: Set Device
start server port and device end server port, and the range is 1–
65535.
Device Start Server Port
Device End Server Port
4. Click
OK
, and the
Firewall
page is displayed.
Step 3 Click
Save
.
Loading ...
Loading ...
Loading ...