Loading ...
Loading ...
Loading ...
4 BISSELL.com
Cleaning Carpets and Area Rugs
Visit support.BISSELL.com for helpful how-to carpet cleaning videos.
• Remove any solids and use a dry vacuum cleaner before using your deep cleaner.
• To prevent damage to Berber carpets, avoid repeated strokes in the same area. Before cleaning
area rugs, check the manufacturer’s tag and test an inconspicuous spot for colorfastness. Don’t
use on silk or delicate rugs.
• Stay off carpet until dry.
1. Plug into a properly
grounded outlet. Select
cleaning mode using the chart
below. Press the power button
to turn the machine ON.
2. Press the recline pedal with
your foot. Hold spray trigger
for 10 seconds to wet the
brush roll.
3. Make passes based on your
selected cleaning mode (see
chart below). When finished,
turn machine OFF.
Cleaning Modes & Instructions
MAX or DEEP Clean Mode
Delivers a deep clean to
your carpet.
Suggested Pace: 8 inches
per second
1. Hold spray trigger
• One pass forward
• One pass back
2. Release the spray
trigger
• One pass forward
• One pass back
MAX or DEEP Clean
Mode with BISSELL®
ANTIBACTERIAL Formula
Suggested Pace: 8 inches
per second
1. Hold spray trigger
• One pass forward
• One pass back
• One pass forward
2. Release the spray
trigger
• One pass back
Express Clean Mode
Provides a lighter clean that dries in
about 30 minutes.
Suggested Pace: 12 inches per second
1. Hold spray trigger
• One pass forward
• One pass back
2. Release the spray trigger
• One pass forward
• One pass back
3. With trigger released, make passes until
little water comes through the nozzle.
Using CleanShot® Pretreater on Tough Stains and Messes
1. With machine reclined, press
the CleanShot button with
your foot. The button will turn
green and show an “I” when it
is on. Spray will continue until
turned off.
2. Maneuver machine and
spray until stain is completely
soaked.
3. Press the button with your
foot to turn OFF. The button
will turn red and show an “O”.
Let soak for 5 minutes.
4. Move machine over stain to
extract. Continue cleaning per
instructions above.
Loading ...
Loading ...
Loading ...