Loading ...
Loading ...
Loading ...
VIDEO
Manual Convergence Adjustment Mode
I NOTES: 1. Please turn ON your television for at ]east 20 minutes before using this feature.
2. Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode.
DO NOT press MAGIC FOCUS or use Auto Adjustment Mode after using Manual Adjustment Mode.
Using the Remote Control, select VIDEO-MAGIC FOCUS-MANUAL ADJUSTMENT MODE-START to access convergence crosshatch
pattern. The adjustment point is indicated by the Adjustment Point Cursor.
To Move Adjustment Point
To move the Adjustment Point Cursor, use the CURSOR buttons. The Adjustment Point Cursor must be WHITE.
Another way to move the Adjustment Point Cursor is to press the followiing buttons: [2] up, [4] left, [5] down, [6] right. If you use the
number buttons while the adjustment point is WHITE, it will change to RED.
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted.
To Adjust the Convergence
Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR 4, I_, A, • to match the RED and BLUE colors to GREEN
(reference color). Properly aligned, all three colors should appear white.
LAud_o
[ ch _na _ ]
IELoo._ >l
[,Mow_S_k ]
CURSOR
..... @
CURSOR
............... @
Video _
Ilii;_i_ii_i;i;iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiU
Aklgns the Red, Green, and Blue
colors to correct for Magnetic
Inf_uences
CURSOR
Adjustment Mod_
O Auto
Manuak
_ f you want to adjust now -"_
_ _ve _ R_tur_
IFW deo
II Pictur_ _de
_ BJ _qh_ne_
IIco*o_ >1
[ coIo_ s¥,._e,. _]
>1IIs_,o_ _1
>1I_o'_'_m I
_] I _o_m:_l
I E_m:_ I
I _o_m:_ I
I E_m:_ I
Adjustment Point
Cursor
/
i
I I
If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode.
EXIT
DONE
CANCEL
INI. RESET
BACK
[1]
[2]
[3]
[4]
Press the [1] button on the remote control to SAVE adjusted data and return to main picture.
Press the [2] button on the remote control to CANCEL adjusted data and return to main picture.
Press the [3] button on the remote control to recall the factory pre-set convergence data.
Press the [4] button on the remote control to return to the manual convergence adjustment mode (crosshatch pattern).
Press the [9] button on the remote control to read the SAVED adjusted data. If there is no saved data, pressing the [9] button will recall
the factory pre-set data.
37
Loading ...
Loading ...
Loading ...